|
|
Electronic detector for thin-film gas microsensors
Rozštípil, Jakub ; Stehlík, Jiří (referee) ; Hubálek, Jaromír (advisor)
The general aim of Master’s thesis is to design and execute electronics in the SMT device view for thin film gas sensors and to study principle of gas sensor functionality based on semiconducting oxides. The SMT device contains temperature controller and electronics which is able to scan the concentration of gas on the sensor surface. It is designed for controlling of four sensors and has to communicate with computer for setting of initial conditions and scanning of concentration of gas. The practical part of Master’s thesis contains design and construction of electronics and software making.
|
|
|
Gas sensors, their construction and testing
Pytlíček, Zdeněk ; Boušek, Jaroslav (referee) ; Prášek, Jan (advisor)
This work deals with branch of gas sensors, their construction and methodology of testing. The general aim is a design and implementation of a station for simple testing of conduction gas sensors. The whole station is conceived as virtual measuring apparatus, operated by PC in LabView environment. The station enables mixing of any two gases at concentration demanded and measuring of the basic conduction characteristics of the thick-film and thin-film gas sensors. The central communication interface and modular conception enable easy expansion of possibilities of the whole apparatus in the future. It is possible to measure up to eight gas sensors split into two TO-12 packages simultaneously.
|
|
|
Nanostructured layers of semiconducting metal oxides in gas sensors
Bartoš, Dušan ; Pytlíček, Zdeněk (referee) ; Bendová, Mária (advisor)
This diploma thesis discusses the gas sensor preparation via anodic oxidation. It names sensor types, deals with the sensing principle of electrochemical sensors in detail and submits sensor parameters. It describes preparation technology and characterization technology methods. In the experimental part, it focuses on both the measurement methodology and the electrochemical oxygen sensor covered with titanium dioxide nanocolumns fabrication. Not the least it discusses acquired research results.
|
|
|
Gas Microsensors Based on Self-Organized 3D Metal-Oxide Nanofilms
Pytlíček, Zdeněk ; Husák, Miroslav (referee) ; Kolařík, Vladimír (referee) ; Prášek, Jan (advisor)
This dissertation concerns the development, fabrication and integration in a gas sensing microdevice of a novel 3-dimensional (3D) nanostructured metal-oxide semiconducting film that effectively merges the benefits of inorganic nanomaterials with the simplicity offered by non-lithographic electrochemistry-based preparation techniques. The film is synthesized via the porous-anodic-alumina-assisted anodizing of an Al/Nb metal bilayer sputter-deposited on a SiO2/Si substrate and is basically composed of a 200 nm thick NbO2 layer holding an array of upright-standing spatially separated Nb2O5 nanocolumns, being 50 nm wide, up to 900 nm long and of 8109 cm2 population density. The nanocolumns work as semiconducting nano-channels, whose resistivity is greatly impacted by the surface and interface reactions. Either Pt or Au patterned electrodes are prepared on the top of the nanocolumn array using an innovative sensor design realized by means of microfabrication technology or via a direct original point electrodeposition technique, followed by selective dissolution of the alumina overlayer. For gas-sensing tests the film is mounted on a standard TO-8 package using the wire-bonding technique. Electrical characterization of the 3D niobium-oxide nanofilm reveals asymmetric electron transport properties due to a Schottky barrier that forms at the Au/Nb2O5 or Pt/Nb2O5 interface. Effects of the active film morphology, structure and composition on the electrical and gas-sensing performance focusing on sensitivity, selectivity, detection limits and response/recovery rates are explored in experimental detection of hydrogen gas and ammonia. The fast and intensive response to H2 confirms the potential of the 3D niobium-oxide nanofilm as highly appropriate active layer for sensing application. A computer-aided microfluidics simulation of gas diffusion in the 3D nanofilm predicts a possibility to substantially improve the gas-sensing performance through the formation of a perforated top electrode, optimizing the film morphology, altering the crystal structure and by introducing certain innovations in the electrode design. Preliminary experiments show that a 3D nanofilm synthesized from an alternative Al/W metal bilayer is another promising candidate for advanced sensor applications. The techniques and materials employed in this work are advantageous for developing technically simple, cost-effective and environmentally friendly solutions for practical micro- and nanodevices, where the well-defined nano-channels for charge carriers and surface reactions may bring unprecedented benefits.
|
|
|
IoT air monitoring
Kousal, Martin ; Povalač, Aleš (referee) ; Frýza, Tomáš (advisor)
The purpose of this bachelor work is to make a device that can measure air quality parameters and send them wirelessly to the server, where that measured data are processed and then shown to the user. The aim is to create a device with the lowest possible power consumption for the possibility of battery operation.
|
|
|
Oxygen detection using gas sensor
Jelínek, Tomáš ; Pytlíček, Zdeněk (referee) ; Prášek, Jan (advisor)
In this master´s thesis various types of gas sensors, their characteristics, principle, active layer and structure are described. This work is focused on semiconductor gas sensors. In the experimental part gas test station is used to measure the main characteristic of commercial sensor Figaro TGS 822 and own SnO2 gas sensors and reaction to oxygen. Both sensors and measurement results are compared with each other.
|
|
|
Characterization of sensitive nanomaterials for MOX gas sensors
Priščák, Juraj ; Gablech, Imrich (referee) ; Chmela, Ondřej (advisor)
This thesis deals with one-dimensional (1D) and two-dimensional nanomaterials (2D) in terms of their utilization for new types of gas sensors. Thesis focuses on study of sensing elements for gas sensors based on semiconductor metal oxide materials (MOX) and their manufacturing technology. The objective of the thesis is the design and implementation of a sensing elements formed by selected nanomaterials based on the structure of interdigital electrodes. The result of the practical part of the thesis is the characterization and comparison of materials in terms of their detection parameters in the presence of selected test gases. The first part of thesis hierarchically defines chemoresistive gas sensor, characterizes and explains its operation principle. Second part studies 1D and 2D nanomaterials of sensing elements for MOX chemoresistive gas sensors, contains a research of their properties and describes their methods of manufacturing and implementation. The last part deals with the implementation of the sensitive layer of the sensor with selected nanomaterials, characterizes and compares their detection properties.
|
|
|
Gas sensor based on carbon nanoparticles
Morávek, Petr ; Pytlíček, Zdeněk (referee) ; Prášek, Jan (advisor)
This thesis deals with characterization of gas sensors based on carbon nanomaterials. In the theoretical chapter, the basic terms connected with the gas detection field, properties of different carbon nanoparticles and methods of their preparation are described. Practical experiments include the evaluation of samples` responses to ammonia, influence of annealing on their response and comparison of pure samples and their modifications.
|
|
|
Electrical, Optical and Sensoric Properties of Organic Semiconductors
Pochekailov, Sergii ; Zmeškal, Oldřich (referee) ; Nešpůrek, Stanislav (advisor)
There is big interest in cheap, sensitive and selective gas sensors. In this work, substituted soluble phthalocyanines are proposed as a sensing materials for several gases. Optical, electrical and gas sensing properties of several phthalocyanines were studied and the mechanisms of their interaction with several analyte gases are described. It was found, that sulfo-substituted Pcs has good sensitivity to humidity. Sulfonamide-substituted phthalocyanines are promising for nitrogen dioxide and volatile organic compounds detection. tert-Butyl-substituted phthalocyanines are sensitive to NO2 under higher temperature and seems to be used for environmental monitoring. Commercial gas sensors for NO2, ethanol and humidity were successfully created.
|
|
|
The gas level measuring device with a capillary made by 3-D printing
Halva, Ondřej ; Búran, Martin (referee) ; Adámek, Martin (advisor)
This thesis is concerned with the experimental design, manufacture, and testing of a 3D printed prototype of a capillary. The aim is to introduce the reader to the issue of 3D printing related to the manufacture of capillaries and focus on chemiresist sensors. Furthermore, the features of microcontroller Atmel Atmega2560 and its applications in sensory technology will be described. In the second part of the thesis, the capillary for sample pre-processing with an output to a gas measuring device with an electrochemical sensor is designed and produced. For the control of the device, the Atmel Atmega 2560 microcontroller is to be used and the device must enable data transfer to PC. The possible applications of the capillary are to be evaluated.
|
guest ::
